General Settings - Psm - JVC KD-G436 Instructions Manual

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
Indications
DEMO
Display
demonstration
1
CLK DISP*
Clock display
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
DIMMER
Dimmer
2
SCROLL*
Scroll
L/O MODE
Line output mode
12
Item Setting, [reference page]
( : Initial)
• DEMO ON : Display demonstration will be activated automatically if no operation
is done for about 20 seconds, [6].
• DEMO OFF : Cancels.
• ON : Clock time is shown on the display at all times when the power is
turned off.
• OFF : Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [6].
1 – 12 [Initial: 1 (1:00)], [6].
00 – 59 [Initial: 00 (1:00)], [6].
• ON : Dims the display illumination.
• OFF : Cancels.
• ONCE : Scrolls the disc information once.
• AUTO : Repeats scrolling (at 5-second intervals).
• OFF : Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
• REAR : Select if the REAR LINE OUT terminals are used for connecting the
speakers (through an external amplifier).
• WOOFER : Select if the REAR LINE OUT terminals are used for connecting a
subwoofer (through an external amplifier).
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.