Activate The Modem - TP-Link TC-7610 User Manual

Chapter 2
Internet
Power adapter Coaxial cable
4 Wait until the Internet LED
ISP's server.
Note:
1. If the Internet LED does not turn solid after about 1 minute, call your ISP's customer service.
2. The product should be connected to cable distribution system that grounded (earthed) in accordance with ANSI/
NFPA 70, the National Electrical Code (NEC), in particular Section 820.93 - Grounding of Outer Conductive Shield of
a Coaxial Cable.
2 3

Activate the Modem

1 Get your Internet service account information and the modem's Information Card
ready.
2 Make sure your computer is set to dynamically obtain an IP address. If not, refer to
Appendix: Troubleshooting
3 Launch a web browser, and visit any website. You will be automatically redirected to
your ISP's self-activation page.
4 Follow the on-screen instructions to activate the modem, and wait for about 10
minutes till the LEDs
If you have any problem activating the modem, call your ISP's customer service.
3
1
2
turns solid. The modem has synchronized with your
> T5 for instructions.
turn solid.
Quick Start
Ethernet cable
Serial Number
MAC Address
8