INTRODUCTION Thank you for purchasing this CLARKE electrically powered ashcan which is designed for fast, easy removal of ash from stoves and fireplaces. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
Uncertainty Factor Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change specifications at any time without prior notice. Always consult the machine’s data plate.
Page 4
3. Never use this product if any part is damaged. Have it inspected and repaired by your Clarke dealer. Do not use if the electric cable, plug, or the machine itself, is in poor condition. 4. Never abuse the power cable. Never pull on the cable when removing the plug from the socket or lift the ashcan by the power cable.
ELECTRICAL CONNECTIONS WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
Page 6
COMPONENTS NO DESCRIPTION NO DESCRIPTION Tank Tank Cover Securing Clip Sponge Filter Suction Tube Cartridge Filter Suction Hose Mesh Canister Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
PREPARATION FOR USE Numbers in brackets refer to the components on page 6. 1. With the ashcan removed from the packaging, undo the securing clips (2) securing the tank cover (5) and remove the components from within the tank. Check for shortages and that no damage was suffered in transit.
Page 8
OPERATING INSTRUCTIONS 1. Switch on the ashcan and use the suction tube to collect the ash. 2. When moving the ashcan: • Always use the handle. • Do not lift it by (or place a strain on) the hose or power cable. 3.
8. Do not attempt to repair or modify the ashcan. Do not attempt any electrical repair yourself. Consult a qualified electrician or the Clarke Service Department on 020 8988 7400. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
PARTS DIAGRAM Ref No Description Carrying Handle Top Cover On/Off Switch Sealing Cap Motor Lid Sealing Ring Ashcan Full Indicator Rubber Seal Filter Microswitch Inner Wiring Motor Housing Top Cover Assembly Suction Hose Cartridge Filter Power Cable & Plug Suction Tube Filter Canister Connecting Elbow Ash Tank 22L...
Need help?
Do you have a question about the CVACASH500 and is the answer not in the manual?
Questions and answers