Gallagher T11 Installation Note page 8

Installation Note | Gallagher T11 Reader
Make the connections from the Gallagher T11 Reader to either the Cardax FT
Controller 3000-4R or 3000-8R as shown:
Note: Within each group, you cannot mix Cardax IV readers with Wiegand Readers.
This is because connecting one Wiegand reader requires all four pins on plug PB. For
example, if you connect a Cardax IV reader to Port 1 of Group 1, Port 2 of Group
1 can only connect to another Cardax IV reader.
8 | Part Number: 3E2513 R1
Cardax FT Controller 3000-4R or 3000-8R
Group
PB1 and PA1... to... PB2 and PA2 (3000-4R)
PB4 and PA4 (3000-8R)
PB
Cardax IV Reader
PA
Cardax IV Reader