Gallagher T11 Installation Note page 6

Installation Note | Gallagher T11 Reader
Connecting to the Cardax FT Reader Module (for the Controller 6000)
Connect the wires to the sockets as shown:
Connecting to the Cardax FT GBUS Universal Reader Interface
Connect the wires to the sockets as shown in either of the following diagrams:
Pin 15
6 | Part Number: 3E2513 R1
Positive Red
Negative Black
Reserved Orange
Reserved Green
Reserved Brown
CDXIV TX White
CDXIV RX Blue
Positive Red
Negative Black
Reserved Orange
Reserved Green
Reserved Brown
CDXIV TX White
CDXIV RX Blue
Cardax FT GBUS URI
Reader
Cardax IV Reader
Cardax FT Reader Module
Cardax FT GBUS URI
Reader
Top Row
Pin 15
Pin 1
Cardax IV Reader
Top Row
Pin 1