Jumbo Frames, the GS108A will forward them, as well as honoring priority tags at both the layer 2 and layer 3 level. This means the GS108A can instantly move even very large files across your network. As an added benefit, this switch works with both Windows and Macintosh computers.
Page 4
Unpack the Box and Verify the Contents Warranty/support information card When you open the box, verify that you received everything. The package includes: • ProSafe 8-Port Gigabit Ethernet Switch GS108A • AC power adapter • Wall-mounting screws • GS108A Installation Guide (this document) •...
Prepare to Install the Switch Decide where you want to place the switch. Find a flat horizontal surface — such as a table, desk or shelf. The switch comes with wall-mounting screws. You’re welcome to use the screws if you want to hang the switch in an open space on a wall.
Ethernet ports on the switch. 3. Connect the power adapter’s cord into the back of the switch and then plug the adapter into a power source (such as a wall socket or power strip).
If the socket is controlled by a light switch, make sure the switch is in the on position. • Make sure you are using the NETGEAR power adapter supplied with your switch. The Port number light is not lit for a connected device or stays on continuously There’s a hardware connection problem.
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.