Zhone SkyZhone 1600 Installation Manual page 32

Figure 13: Contents of wall mount enclosure kit (from left: the lid, the front cover,
the bracket and the base)
32
SkyZhone 1600, 1400, 1200 Hardware Install Guide
To mount the optional cover:
______________________________________________________
Note: The mounting of the SkyZhone unit should be as high as possible
to ensure maximum coverage. A flat surface measuring 24 inches high and 36
inches wide will be needed to mount the unit securely.
______________________________________________________
1.
Find a flat surface that is at least 24 inches tall and 36 inches wide.
2.
Drill the holes in the wall to align with the corresponding holes in the
mounting bracket. See Figure 14.
3.
Obtain the proper screws (not included) to anchor the wall mount assembly
to the type of surface it is being mounted to.
4.
Place the mounting bracket on the rear panel of the cover, lining up the
mounting holes.
5.
Fasten the mounting bracket in the desired location with the appropriate
type of screw. Use the outside holes displayed in Figure 16. These should
line up with the holes in the cover.