Mounting The Skyzhone To A Pole - Zhone SkyZhone 1600 Installation Manual

Mounting the SkyZhone to a pole

This section describes the steps to mount a pole for the SkyZhone access point. First
select a mounting location. You can attach the SkyZhone access point to any pipe or
pole.
1.
Figure 8: Threading screw clamp bands through mounting plate slots
2.
Secure the screw clamp bands around the pole, using a large slotted screwdriver.
Attach screw clamp bands to the pole mounting plate by threading them through
the slots on the mounting plate. The slots are for either horizontal or vertical
mounting on large or small diameter poles. Choose the one most appropriate for
this installation.
SkyZhone 1600, 1400, 1200 Hardware Installation Guide
27