D-Link DCS-1000 Installation Manual page 2

Attach the External Power Supply
Attach the external power supply to
the DC power input connector located
on the DCS-1000's rear panel and is
labeled DC 5V and connect it to your
local power supply.
Note: Confirm power source is
supplied from the LED indicators
label "Power" on the DCS-1000.
Configuring the IP address on your PC
The instructions contained in this section are intended for users of
Windows Me, 98 and 95. Please refer to the documentation for your
specific operating instructions for details on changing the IP address of
your computer so that you can access and configure the DCS-1000.
If your computer already uses an IP address of 192.168.0.x, please skip to
the next section.
With your computer on,
open the Control
Panel by clicking the
Start button, select
Settings , and click on
Control Panel .