D-Link DNS-120 Manual page 34

Scheduling
Save To
Enter a valid destination folder path to an attached USB drive on DNS-120. Click on
the Open button to begin this process. Refer to the image on the previous page and
the corresponding description on how to select the desired destination folder.
When
Enter the date and time you wish the file or folder transfer to commence. The current
date and time according the DNS-120 internal clock will be displayed in the various
drop-down boxes that appear as a reference point. The format of the date is Year/
Month/Day. The time is set and displayed in 24 hour format.
Recurring Backup
If the backup is to happen unattended at regular intervals, then designate the
appropriate interval (e.g. daily, weekly, or monthly) and specific time for the backup to
occur.
Example: In the figure below, the recurring backup will be performed every Wednesday
at 17:00 or 5:00pm.
Options for specific day and month will appear when the appropriate time period is
chosen. Recurring backup jobs will commence with the next occurrence of the time
interval chosen. For example, in the example above, if the above backup was configured
on a Thursday, the DNS-120 will wait until the following Wednesday to begin the backup.
Incremental Backup
By default all backups and file/folder transfers are in Overwrite mode. This means that
files at the destination drive/folder with identical names will be written over by the source
files. If the Incremental Backup option is checked, then DNS-120 will compare identical
file names at source and destination by Last Modified Date/Time and overwrite the
destination if the source is more recent.
Note: Incremental Backup is not available for HTTP or FTP transfers as the Last Modified
Date/Time is not accessible at the remote location.
Apply
Click this button to accept the settings and create the scheduled transfer or backup.
Cancel
Click this button to reset the settings to default values.
34