D-Link DNS-120 Manual page 15

Web Configuration
Home > LAN
LAN Settings
This section contains all LAN settings to configure the DNS-120 to the network. Depending
on how the network is set up, changes to this page may or may not be necessary.
DHCP Client
Clicking this option enables the DNS-120 to request an IP and auto-configure itself to
the network if there is a DHCP Server present. By default, DHCP is enabled.
Static IP
Click this option if there is no DHCP Server present on the network and manually enter
the network settings in the fields provided below this option.
· IP Address – Enter the static IP address
· Subnet Mask – Enter the Subnet Mask address
· Gateway IP Address – Enter the Gateway IP address
· DNS1 and DNS2 (both optional) – If available, enter those IP addresses here
If you need assistance in manually entering the above information, contact your network
administrator for additional help in configuring the network settings.
15