D-Link DNS-120 Manual page 26

Web Configuration
Tools > System (continued)
Click OK to restart. The restart will take approximately 1 minute before DNS-120 will
be ready for use again. Click Cancel to abort this operation.
Reset To Factory Default Settings
This function will reset the DNS-120 to factory default settings. Make sure to write
down any current DNS-120 settings or options that need to be re-applied after the
reset is completed. Click the OK button to reset. The following message will appear
before starting:
Click OK to begin reset. The reset will take approximately 1 minute before DNS-120
will be ready for use again. Click Cancel to abort this operation.
Idle Time
This setting will define how many minutes of idle time or inactivity elapses before
DNS-120 logs out the current user from the Web configuration utility.
System Inactivity Timer – Specify amount of idle time (up to 999
minutes) for the Web Config section.
Download Schedule Inactivity Timer – Specify amount of idle time (up
to 999 minutes) for the Download Schedule section.
Click the Apply button to Idle Time changes.
To reset the Idle Time settings and start over, click the Cancel button. To access
online help for System Settings, click the Help button.
26