Removing The Ccd - Clevo N855HC Service Manual

Removing the CCD

1. Turn off the computer, turn it over to remove the battery
2. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Carefully remove the
rubber covers - and screws
1 2
3. Run your fingers around the inner frame of the LCD panel to lift at the upper point
Lift the outer frame at the middle points
inner frame at the lower point
4. Remove the LCD front cover
a.
3
1
b.
(page 2 -
- .
3 4
- as indicated by the arrows, and then run your fingers around the
6 7
as indicated by the arrows (Figure
8
(Figure 10b).
9
6
2
4
9
5).
as indicated by the arrows.
5
10a).
5
7
8
Disassembly
Figure 10
CCD Removal
a. Remove rubber and
screws. Then carefully
release the inner frame
of the LCD panel at the
points indicated by the
arrows.
b. Remove the LCD front
cover.

9. LCD Front Cover
• 2 Screws
Removing the CCD 2 - 15