BT 3100 User Manual page 35

that are flashing indicate
other bases that the handset is
already registered to).
Enter the base number
(
register the handset to.
Enter your 4-digit PIN
(original factory setting OOOO)
and press the
The display will show
SEARCH 1, 2, 3, 4 and the
symbol will flash as the
handset tries to locate the base.
When the handset locates
the base, the handset will be
automatically selected and
shown on the display.
If the handset does not locate the
base, the handset will return to
the previous menu. Try to register
again by using a different
available base number. Ensure
that you are in close vicinity of
the base).
Your 4 digit PIN number is 0000
unless you have previously allocated
a new PIN number as explained on
page 25.
32
) that you want to
button.
Handsets can only be de-registered
via another handset.
Press the
the menu.
Use the
scroll to SETUP and press the
button.
Use the
scroll to DEL HS and press
the button.
The display will show PIN?
Enter your 4-digit PIN.
Press the
Use the or
to select the handset you want
to de-register (HANDSET 1-5).
Press the
shows CONFIRM?.
Press . You will hear a
confirmation beep.
Once de-registered, the
handset will display NOT REG.
button to enter
button to
button to
button.
button
button. Display