Selecting The Connected Usb Source - Epson Home Cinema 660 User Manual

2. Connect the USB cable (or USB flash drive) to the projector's USB-A port.
Home Cinema 660/760HD
Home Cinema 1060
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic:

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to the USB-A port.
1. Make sure the connected USB source is turned on, if necessary.
Connecting to External USB Devices
45