Fuses; Important Safety Notes - Mercedes-Benz GLS Operator's Manual

Hide thumbs Also See for GLS:
Table of Contents

Advertisement

Fuses

352
Vehicles with 4MATIC may either be towed away
with both axles on the ground or be loaded up
and transported.
If the vehicle's transmission, front, or rear axle is
damaged, have the vehicle transported on a
truck or trailer.
In the event of damage to the electrical sys-
tem: if the battery is defective, the automatic
transmission will be locked in position P. To shift
the automatic transmission to position N, you
must provide power to the vehicle's electrical
system in the same way as when jump-starting
(
page 346).
Y
Have the vehicle transported on a transporter or
trailer.
Tow-starting (emergency engine
starting)
!
Vehicles with automatic transmission must
not be tow-started. You could otherwise dam-
age the automatic transmission.
You can find information on "Jump-starting"
under (
page 346).
Y
Fuses

Important safety notes

G
WARNING
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric cables could be overloaded.
This could result in a fire. There is a risk of an
accident and injury.
Always replace faulty fuses with the specified
new fuses having the correct amperage.
!
For the fuse boxes in the engine compart-
ment and under the rear bench seat, only use
fuses with the suffix "S". Otherwise, compo-
nents or systems could be damaged.
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it is
lying correctly on the fuse box. Moisture seep-
ing in or dirt could otherwise impair the oper-
ation of the fuses.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions stop
operating.
Blown fuses must be replaced with fuses of the
same rating, which you can recognize by the
color and value. The fuse ratings are listed in the
fuse allocation chart.
The fuse allocation chart is located in the fuse
box under the rear bench seat (
If a newly inserted fuse also blows, have the
cause traced and rectified at a qualified special-
ist workshop, e.g. an authorized Mercedes-Benz
Center.
Before changing a fuse
Observe the important safety notes
(
page 352)
Y
Switch off the engine.
X
Switch off all electrical consumers.
X
Remove the SmartKey from the ignition lock.
X
Or, on vehicles with KEYLESS-GO start function
or KEYLESS‑GO:
Open the driver's door.
X
The vehicle electronics are now in key posi-
tion u. This is the same as the SmartKey
having been removed.
The driver's door can be closed again.
Secure the vehicle against rolling away
X
(
page 161).
Y
All indicator lamps in the instrument cluster
must be off.
The fuses are located in various fuse boxes:
Fuse box on the front-passenger side of the
R
dashboard
Fuse box in the engine compartment on the
R
right-hand side of the vehicle, when viewed in
the direction of travel
Fuse box under the rear bench seat
R
Dashboard fuse box
!
Do not use a pointed object such as a screw-
driver to open the cover in the dashboard. You
could damage the dashboard or the cover.
Mercedes-Benz recommends that you have this
work performed at a qualified specialist work-
page 353).
Y

Advertisement

Table of Contents
loading

Table of Contents