JVC KD-SHX705 Service Manual page 18

3.2.8 Removing the rod (L)(R) and roller assembly
(See Figs.15 and 16)
• Prior to performing the following procedures, remove the top
cover, mechanism section, front unit and loading arm S.A.
(1) From the bottom side of the loading arm S.A., release the
rod (L) and (R) from the joints r. (See Fig.15)
(2) Remove the roller assembly from the loading assembly.
(See Fig.16)
(3) Remove the two collars and washer from the roller assem-
bly. (See Fig.16)
Caution:
After attaching the roller assembly to the loading arm S.A., at-
tach the rod (L) and (R). Attach the rods to the right and left col-
lars of the roller. (See Fig.15)
1-18 (No.MA048)
Collar
Rod(R)
Joints r
Rod(R)
Loading arm S.A.
Joints r
Fig.15
Roller assembly
Collar
Rod(L)
Fig.16
Collar
Rod(L)
Joints r
Rod(L)
Joints r
Collar
Washer
Rod(R)
Loading arm S.A.