Table of Contents
Advertisement
AXIS Q6124-E PTZ Network Camera
Setup
Note
Increasing the max shutter value can result in motion blur.
•
The shutter speed should be as slow as possible, which means you should set max shutter to the highest possible value.
•
Reduce sharpness in the image.
•
Try lowering the max gain value.
How to reduce motion blur in low-light conditions
To reduce motion blur in low-light conditions, you can adjust one or more of the following settings:
Note
Image noise will increase if you increase the gain.
•
Increase shutter speed and gain. Go to Settings > Image > Exposure and set Max shutter to a lower value, and Max gain
to a higher value.
If you are still experiencing motion blur, you can try one of the following:
•
Increase the light level in the scene.
•
Mount the camera so that objects move toward it or away from it rather than sideways.
How to benefit from IR light in low-light conditions using night mode
Your camera uses visible light to deliver color images during the day. As light diminishes, you can set the camera to automatically
shift to night mode. In night mode the camera uses both visible light and near-infrared light to deliver black-and-white images.
Since the camera uses more of the available light it can deliver brighter, more detailed, images.
1. Go to Settings > Image > Day and night, and make sure that the IR cut filter is set to Auto.
How to select exposure mode
There are different exposure mode options in the camera that adjusts aperture, shutter speed, and gain to improve image quality for
specific surveillance scenes. Go to Settings > Image > Exposure and select between the following exposure modes:
•
For most use cases, select Automatic exposure.
•
If you need full control of all parameters, mostly useful for scenes with little change in lighting, select Manual.
How to maximize details in an image
Important
If you maximize details in an image, bitrate increases and might lead to reduced frame rate.
•
Make sure to select capture mode that has the highest resolution.
•
Set compression as low as possible.
•
Select MJPEG streaming.
•
Turn off the Zipstream functionality.
How to stabilize a shaky image with Electronic Image Stabilization (EIS)
EIS can be used in environments where the product is mounted in an exposed location and subject to vibrations, for example, wind
or passing traffic. Turn on EIS to get a smoother and steadier image without blur.
8
Advertisement
Table of Contents
