Table of Contents
Advertisement
Chapter 2
Hardware Specifications
Table 2-30
Firepower 7115, 7125 and AMP7150 System Components: Rear View
Features
VGA port
USB port
10/100/1000 Ethernet
management interface
System ID LED
Grounding studs
Redundant power supplies
Power supply LEDs
The 10/100/1000 management interface is located on the rear of the appliance. The following table
describes the LEDs associated with the management interface.
Table 2-31
LED
Left (activity)
Right (link)
The power supply modules are located on the rear of the appliance. The following table describes the
LED associated with the power supply.
Table 2-32
LED
Off
Red
Blinking red
Description
Allows you to attach a monitor, keyboard, and mouse to the device to establish a direct
workstation-to-appliance connection.
Provides for an out-of-band management network connection. The management
interface is used for maintenance and configuration purposed only and is not intended to
carry service traffic.
Helps identify a system installed in a high-density rack with other similar systems. The
blue light indicates that the ID button is pressed.
Allows you to connect the appliance to the Common Bonding Network. See the
Requirements for Firepower 7000 Series Devices, page A-1
Provides power to the device through an AC power source. Looking at the rear of the
chassis, power supply #1 is on the left and power supply #2 is on the right.
Indicates the status of the power supply. See
AMP7150 Power Supply LED, page
Firepower 7115, 7125, and AMP7150 Management Interface LEDs
Description
Indicates activity on the port:
•
A blinking light indicates activity.
•
No light indicates there is no activity.
Indicates whether the link is up:
A light indicates the link is up.
•
No light indicates there is no link.
•
Firepower 7115, 7125, and AMP7150 Power Supply LED
Description
The power cord is not plugged in.
No power supplied to this module.
or
A power supply critical event, such as module failure, a blown fuse, or a fan
failure; the power supply shuts down.
A power supply warning event, such as high temperature or a slow fan; the
power supply continues to operate.
Firepower 7000 Series Devices
for more information.
Table 2-32Firepower 7115, 7125, and
2-19.
Firepower 7000 Series Hardware Installation Guide
Power
2 -19
Advertisement
Table of Contents
