Firepower 7115, 7125, And Amp7150 - Cisco Firepower 7010, Firepower 7020, Firepower 7030, Firepower 7050, Firepower 7110, Firepower 7120, Firepower 7115, Firepower 7125, Installation Manual

7000 series hardware
Table of Contents

Advertisement

Chapter 2
Hardware Specifications
Table 2-21
Firepower 7110 and 7120 Physical and Environmental Parameters (continued)
Parameter
Power supply
Solid-state drive (SSD)
Operating temperature
Non-operating temperature -29
Operating humidity
Non-operating humidity
Altitude
Cooling requirements
Acoustic noise
Operating shock
Airflow

Firepower 7115, 7125, and AMP7150

The Firepower 7115, 7125, and AMP7150 devices, part of the 71xx Family, are delivered with four-port
copper interfaces with configurable bypass capability, and eight hot-swappable small form-factor
pluggable (SFP) ports without bypass capability. To ensure compatibility, use only Cisco SFP
transceivers.
The Firepower AMP7150 has many of the same form factors as the Firepower 7115 and 7125, but has
Note
been optimized to take advantage of the Firepower System's AMP for Networks capabilities.
See the following sections for more information:
Description
450 W dual redundant (1+1) AC power supplies
Voltage: 100 VAC to 240 VAC nominal (85 VAC to 264 VAC maximum)
Current: 3A maximum for 90 VAC to 132 VAC, per supply
1.5A maximum for 187 VAC to 264 VAC, per supply
Frequency range: 47 Hz to 63 Hz
240GB 2.5-inch SSD.
o
o
o
41
F to 104
F (5
C to 40
o
o
o
F to 158
F (-20
C to 70
5% to 85% non-condensing
5% to 90%, non-condensing with a maximum wet bulb of 82
o
o
o
to 95
F (25
C to 35
C)
Store the unit below 95% non-condensing relative humidity. Acclimate below maximum
operating humidity at least 48 hours before placing the unit in service.
0ft (sea level) to 5905 ft (0 m to 1800 m)
900 BTU/hour
You must provide sufficient cooling to maintain the appliance within its required operating
temperature range. Failure to do this may cause a malfunction or damage to the appliance.
64 dBA at full processor load, normal fan operation
Meets GR-63-CORE 4.6 Acoustic Noise
Complies with Bellecore GR-63-CORE standards
3
3
140 ft
(3.9 m
) per minute
Airflow through the appliance enters at the front and exits at the rear with no side ventilation.
Firepower 7115, 7125, and AMP7150 Chassis Front View, page 2-14
Firepower 7115, 7125, and AMP7150 Chassis Rear View, page 2-18
Firepower 7115, 7125, and AMP7150 Physical and Environmental Parameters, page 2-20
o
C)
o
C)
Firepower 7000 Series Hardware Installation Guide
Firepower 7000 Series Devices
o
o
F (28
C) at temperatures from 77
o
F
2 -13

Advertisement

Table of Contents
loading

Table of Contents