Disassembly Method - JVC UX-A52 Service Manual

Disassembly method

<Main body>
Removing the rear cover
1. Remove the nine screws A on the back of the body.
2. Remove the two screws B
body.
3. Unlock the speaker terminal and the antenna
terminal, then remove the rear cover backward with
releasing the hooks.
Removing the side panels
Prior to performing the following procedure, remove
the rear cover.
1. Remove the two screws C attaching the side panels
on the bottom of the body.
2. Remove each side panel backward while releasing
the eight joints a as shown in Fig.4 and 5.
Joint
Side panel (R)
(See Fig.1 and 2)
on the bottom of the
(See Fig.3 to 5)
Joint a
a
Fig.4
Rear cover
A
Antenna terminal
A
Side panel (R)
(Bottom)
Side panel (L)
C
C
Joint
A
A
Speaker terminal
Fig.1
Rear cover
B
B
Fig.2
Side panel (R)
Side panel (L)
Fig.3
a Joint a
Side panel (L)
Fig.5
UX-A52
1-5