JVC UX-A52 Service Manual page 14

UX-A52
Removing the LCD board assembly
Prior to performing the following procedure, remove
the relay board and the LCD section.
1. Remove the four screws U attaching the case cover.
2. Remove the four screws V attaching the LCD panel
on the back of the LCD section.
3. Remove the LCD cover.
4. Release the three joints g
board assembly in the direction of the arrow.
LCD cover
Fig.35
1-14
(See Fig.32 to 36)
and remove the LCD
U
U
Fig.32
V
V
Fig.33
LCD panel
Fig.34
Joint g
LCD board assembly
Fig.36
Case cover
U
U
LCD section
Joint g
Joint g