Navigating the System Menu
The System Setup Menu may be accessed in two ways: 1) Using
the remote control unit, or 2) by using the control buttons on top
of your TV set.
CH +
CH -
1
Press the Menu key on the remote
control or on the unit. The Main Setup
menu will appear on-screen.
2
/
Use the
keys on the remote or
the CH
/
keys on the unit to
navigate the menu. Use the ENTER
key on the remote or the unit make
selections.
3
Use the MENU key to return to an
upper layer of the menu.
Selecting Display Mode
Select different display modes for this unit. It can be a TV with
different audio and video input modes, or a computer monitor.
INPUT SELECT
AV
EQ
SAP
ASPECT
DISP
1
Press either TV, AV or VGA keys on
the remote control to select a display
mode.
TV - For TV tuner mode.
AV - Press this key repeatedly to
cycle through the various inputs
available
VGA - Press this key to select VGA
mode to use as a PC monitor. Some
HD receivers uses this input to
display HD signals.
GETTING STARTED
Main Setup
Video
Audio
TV
VGA
OSD
TIMER
System
SLEEP
VGA
JUMP
Television
TV mode -Auto Scan Channels
INPUT SELECT
AV
SAP
EQ
ASPECT
DISP
1
Press the "TV" key on the remote
control.
2
Press the MENU key on the remote,
use the
key to select "TV". Press
ENTER, select "INSTALL" from the
next menu and press ENTER again.
3
Select "TV System" and press
ENTER. Select the menu item which
best fits your TV source, AIR, CABLE,
etc.
4
Press MENU, then use the
select "Auto Search" and press
ENTER to search for channels, an on-
screen dialog box will appear as
Auto Search
28%
5
Once the channel search is finished,
you are now ready to watch your
favorite programs. Use the CH +/-
key or the number keys to select a
channel.
TV mode - Manual Channel Programming
INPUT SELECT
AV
EQ
SAP
ASPECT
DISP
1
Press the "TV" key on the remote
control. Use the number keys to
select a channel.
15
Main Setup
SLEEP
Video
Audio
TV
VGA
VGA
OSD
TIMER
JUMP
System
key to
Main Setup
SLEEP
Video
Audio
TV
VGA
VGA
OSD
TIMER
JUMP
System