Table of Contents
Advertisement
Connecting your unit to an external antenna or cable TV signal.
In order to use this unit as a television or monitor, you will need to make a video connection to your TV. There are several
connections supported:
Composite Video - The most widely used connection, using RCA-type cables (not supplied).
S-Video - A higher quality connection that requires a special S-Video cable (not supplied).
Component Video - The highest quality video connection, typically used with HD receivers (not supplied).
RGB (VGA) - Mostly used with a PC, though some HD receivers use this type of connection (supplied).
This unit ships with an RGB cable for connection to personal computers or HD receivers with a standard DB-15 VGA output socket.
1
First, use a coaxial RF cable (not supplied) to connect
your antenna input to a video source such as an aerial
antenna or cable TV signal provided by your cable
company.
1
Press the POWER key on the remote control or the TV to
power on TV.
INPUT SELECT
AV
EQ
SAP
ASPECT
DISP
2
On your remote control, select the video input by
pressing TV.
3
The TV will now display the channel it is on.
3
CONNECTIONS
SLEEP
VGA
JUMP
Coaxial RF Cable
(Not Supplied)
Coaxial RF Cable
10
Antenna, Cable or
Set-Top Box Input
Advertisement
Table of Contents
