Disassembly - AlleyOOP Sports 12ft VariableBounce Trampoline System User Manual

Assembly and Installation Instructions
Final Steps (continued)
See Diagram 1, below, to see how to properly enter the safety enclosure.
Note: The upper and lower support straps may need periodic tightening. Check the knots and straps regularly. If the
net sags due to extended use, we recommend repeating Steps 21 through 39.
Diagram 1
(Top view)

Disassembly

To disassemble your 12ft VariableBounce Trampoline System, follow the assembly steps in reverse order. Do not
attempt to disassemble any rail pieces before the mat and springs have been removed.
To enter your
AlleyOOP 12' Varia-
bleBounce Trampoline
System, step up onto
the frame between
poles 1 and 8.
to the right, passing
between the inside
and outside panels
Trampoline Ladder*
makes entering the
trampoline easy.
Enter through here.
*For more information about
the SureStep Trampoline Ladder,
the Trampoline Anchor Kit,
the ProFlex Basketball Set,
the BounceBoard Extreme,
and other great trampoline accessories,
visit our website at www.jumpsport.com
Then, move
of net.
A SureStep
Pole 8
24
Pole 1