Receiving And Responding To A Talkgroup Call; Receiving And Responding To A Private Call (Trunking Only) - Motorola APX7000 User Manual

Receiving and Responding to a Talkgroup Call

To receive a call from a group of users, your radio must be
configured as part of that talkgroup.
Procedure:
When you receive a talkgroup call (while on the Home screen),
depending on how your radio is preprogrammed:
1
ASTRO Conventional Only:
The LED lights up solid yellow.
OR
Trunking Only:
The display shows the caller alias or ID.
2
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3
Press the PTT button to respond to the call. The LED lights
up solid red.
4
Release the PTT button to listen.
See Making a Talkgroup Call on page 21 for details on making
a Talkgroup Call.
Receiving and Responding to a Private Call
(Trunking Only)
A Private Call is a call from an individual radio to another
individual radio.
These one-to-one calls between two radios are not heard by
others in the current talkgroup. The calling radio automatically
verifies that the receiving radio is active on the system and can
display the caller's ID.
Note: The radio automatically exits the feature, if the time-out
timer is enabled, when the radio is left idle and the
timer expires. You will hear the Inactive Exit Tone upon
feature exit.
Procedure:
When you receive a Private Call:
1
You hear two alert tones and the LED blinks green. The
backlight of the screen turns green and the display shows
CALL RCV, alternating with the caller alias (name) or ID
(number).
19
English