Extreme Networks AP-8533 Installation Manual page 28

Hide thumbs Also See for AP-8533:
Table of Contents

Advertisement

15 Set the following DHCP and Static IP Address/Subnet information for the LAN interface:
• Use DHCP - Select the checkbox to enable an automatic network address
configuration using the Access Point's DHCP server.
• Static IP Address/Subnet - Enter an IP Address and a subnet for the Access Point's
LAN interface. If Use DHCP is selected, this field is not available. When selecting this
option, define the following DHCP Server and Domain Name Server (DNS) resources,
as those fields will become enabled on the bottom portion of the screen.
• Use on-board DHCP server to assign IP addresses to wireless clients - Select the
checkbox to enable the Access Point's DHCP server to provide IP and DNS
information to requesting clients on the LAN interface.
• Range - Enter a starting and ending IP Address range for client assignments on the
LAN interface. Avoid assigning IP addresses from x.x.x.1 - x.x.x.10 and x.x.x.255, as
they are often reserved for standard network services. This is a required parameter.
• Default Gateway - Define a default gateway address for use with the default gateway.
This is a required parameter.
• DNS Forwarding - Select this option to allow a DNS server to translate domain names
into IP addresses. If this option is not selected, a primary and secondary DNS
resource must be specified. DNS forwarding is useful when a request for a domain
name is made but the DNS server, responsible for converting the name into its
corresponding IP address, cannot locate the matching IP address.
• Primary DNS - Enter an IP Address for the main Domain Name Server providing DNS
services for the Access Point's LAN interface.
• Secondary DNS - Enter an IP Address for the backup Domain Name Server providing
DNS services for the Access Point's LAN interface.
16 Select Next . The Typical Setup Wizard displays the Wireless LAN Setup screen to set
the an Access Point's WLAN 1 and WLAN 2 configuration.
AP-8533 Access Point Installation Guide
Basic Access Point Configuration
26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents