Extreme Networks AP-8533 Installation Manual page 13

when connecting the unit to the Access Point's GE1/POE port. The Power Injector is
separately ordered and not shipped with an existing AP SKU.
The Access Point Power Supply (Part No. PWR-BGA48V45W0WW) is not included with the
Access Point and is orderable separately as an accessory. If the Access Point is provided
both POE power and PWR-BGA48V45W0WW power concurrently, the Access Point will
source power from the PWR-BGA48V45W0WW supply only. Disconnecting the AC power
from the PWR-BGA48V45W0WW causes the Access Point to re-boot before sourcing
power from the POE Power Injector. If the AP is operating using injector supplied power,
the AP will not automatically reboot if an AC adapter is connected. The Access Point
continues to operate with power supplied from the AC adapter without change to the
Access Point operating configuration. If using AC adapter supplied power and a change to
the AP's operating configuration is warranted, the Access Point needs to be manually
rebooted.
CAUTION
The Access Point supports any standards-based compliant power source.
However, using the wrong solution (including a POE system used on a legacy
Access Point) could either limit functionality or severely damage the Access
Point and void the product warranty.
A separate Power Injector is required for each AP-8533 Access Point comprising the
network.
AP-8533 Access Point Installation Guide
Hardware Installation
11