Extreme Networks AP-7532 Installation Manual page 25

The Wireless screen displays fields where Radio Settings and Wireless LAN settings can
be defined. Its recommended default radio settings remain as is for the Access Point's
basic setup.
In respect to the Radio Settings, the professional installer should be aware of the following:
NOTE
The above example includes a field for setting the antenna gain. This setting is only
available for external antenna Access Points and does not display for internal antenna
Access Points.
• The Channels available for configuration are channels for which the product is
approved in its selected country. The professional installer must ensure the product is
set to operate under conditions, and on channels, approved by country regulations.
• Selecting Smart as the Power setting automatically configures radio power to not
exceed the maximum power allowed by the defined country. For static power
settings, the professional installer must ensure the configured power levels are
compliant with local and regional regulations. The county selected automatically
limits the maximum output power that can be set.
• For external antenna Access Points, configure the Antenna Gain based on the
antenna used in the deployment. The set gain value should include the antenna gain,
along with any additional components, such as extension cables used between the
Access Point and the antenna.
In respect to Wireless LAN settings, at minimum, a WLAN should be created providing
some measure of security.
16 To create a new WLAN, select + Add from the upper, left-hand side of the Wireless LAN
field.
AP-7532 Access Point Installation Guide
Basic Access Point Configuration
23