Extreme Networks AP-7532 Installation Manual page 22

6 Select the Country Code specific to this Access Point's deployment location.
Selecting the correct country is central to legal operation. Each country has its own
regulatory restrictions concerning electromagnetic emissions and the maximum RF
signal strength that can be transmitted. Select Apply to implement the selected Country
Code. SKU's only support certain countries (for example: a US SKU only includes US,
Guam, Puerto Rico, American Samoa, US Virgin Islands and Mariana Island).
The Access Point automatically displays a Dashboard where users can assess network
health and conduct a diagnostic review of Access Point performance.
NOTE
At some point in the Access Point's initial setup, the default password should be
changed to enhance the security of the Access Point managed network. Refer to the
Configuration > Management screen to change the default password to a more secure
password.
7 Expand the Configuration menu item and select Basic.
8 Set the following Basic Configuration Settings for this Access Point:
• AP Name - Provide an AP Name used as this Access Point's network identifier. If
setting this Access Point as a Virtual Controller, each Access Point managed by this
Virtual Controller lists this Access Point's AP Name as its own. The AP Name is a
required parameter.
• Country Code - If the Country Code was not set when the Access Point was initially
powered on, set the country now to ensure the Access Point's legal operation. The
Access Point's wireless capabilities are disabled until the required country code is set.
AP-7532 Access Point Installation Guide
Basic Access Point Configuration
20