D-Link DCS-4622 User Manual page 39

Section 3: Configuration
Create and schedule up to three events with their own settings here. After making any changes,
click the Save Settings button to save your changes.
Event name:
Enter a name for the event.
Enable this Select this box to activate this event.
event:
Priority: Set the priority for this event. The event with higher priority will be executed
first.
Delay: Specify the delay time before allowing this event to be triggered again. This
is used for both motion detection events and digital input triggers.
Trigger: Specify the input type that triggers the event.
Video Motion Selecting this will trigger the event when motion is detected during live
Detection: video monitoring. Make sure you have enabled motion detection and
specified what part of the image to monitor for motion. For more details,
refer to Motion Detection on page 33.
Periodic: Selecting this will trigger the event in specified intervals. The trigger
interval unit is in minutes.
System Boot: Selecting this will trigger an event when the system boots up.
Network Lost: Selecting this will trigger an event when the camera's connection to the
network is lost.
Event Specify when you want to monitor for this event. Select which days to
Schedule: monitor for this event, then select Always or enter the time interval to
monitor for the specified event.
Action: Select what you want the camera to do when the event happens. Select
the Server to use, then choose the Media you want to save to it. Please note
that you need to set up your Server and Media entries first.
D-Link DCS-4622 User Manual
Add Event
39