Network Setup - D-Link DCS-4622 User Manual

Section 3: Configuration
Use this section to configure the network settings for your camera. After making any changes, click the Save Settings button to save your changes.
LAN Settings: This section lets you configure settings for your local area network.
DHCP: Select this connection if you have a DHCP server running on your network
and would like your camera to obtain an IP address automatically.
If you choose DHCP, you do not need to fill out the IP address settings.
Static IP Client:
You may obtain a static or fixed IP address and other network information
from your network administrator for your camera.
IP Address: Enter the IP address that the camera will use on your network. You may
need to get this information from your ISP or network administrator.
Subnet Mask:
This is used to determine if the destination is part of the same subnet. The
default value is 255.255.255.0.
Default Router: Enter the IP address of the router used to forward frames to destinations
in a different subnet. Invalid router settings may cause the failure of
transmissions to a different subnet.
Primary DNS: Enter the IP address of the primary domain name server that translates
names to IP addresses.
Secondary
Enter the IP address of the secondary domain name server to serve as a
DNS: backup for the Primary DNS.
Enable UPnP Enabling this setting allows your camera to be configured as a UPnP device
Presentation:
on your network.
D-Link DCS-4622 User Manual

Network Setup

25