System - D-Link DCS-4622 User Manual

Section 3: Configuration
In this section, you may back up, restore and reset the camera configuration, or reboot the camera.
Save To Local You may save your current camera configuration as a file on your computer.
Hard Drive:
Load From Locate a pre-saved configuration by clicking Browse and then restore the
Local Hard pre-defined settings to your camera by clicking Load Configuration.
Drive:
Restore
You may reset your camera and restore the factory settings by clicking
to Factory Restore Factory Defaults.
Defaults:
Reboot Device:
This will restart your camera.
Enable If you want your camera to reboot on a regular schedule, check the Enable
Schedule Reboot checkbox, then select the days and time you want the
Schedule
Reboot:
camera to reboot on.
D-Link DCS-4622 User Manual

System

49