D-Link DCS-4622 User Manual page 30

Section 3: Configuration
Saturation: This setting controls the amount of coloration, from grayscale to fully saturated.
Sharpness: Specify a value from 0 to 8 to specify how much sharpening to apply to the
image.
Mount Type: Set whether your camera is mounted on a Desktop, Wall, or Ceiling. This will
allow the camera to adjust and orient the video accordingly and allow the ePTZ
controls to work properly. Please note that when Wall is selected, you will only
be able to use the 180° display mode on the Live Video page.
WDR Level: WDR makes it easier to see objects that may appear dark due to strong
backlighting conditions during the daytime. Higher WDR levels will make it
easier to see objects in shadows.
3D Filter: 3D filtering reduces the amount of image noise when viewing a low-light
environment. Higher levels of 3D filtering will apply stronger levels of noise
reduction.
Reset Default: Click this button to reset the image settings to the factory defaults.
D-Link DCS-4622 User Manual 30