Table of Contents
Advertisement
HRX-OM-Q033
Chapter 2
Contact input/output communication
26.
Select contact output 2 function from the table below with [▲] key or [▼] key, and confirm
by pressing "SEL".
Set values
1: Anti-snow coverage function cannot be set on the products of the cooling method '-W'.
Contact output 2 operation Setting and checking
27.
Press the [SEL] key once.
The set screen of contact output 2 operation is displayed on the digital display.
PV
SV
28.
Select contact output 2 operation from the table below with [▲] key or [▼] key, and confirm
by pressing "SEL".
Set values
2.4 Setting and checking
2-12
Table 2.4-14 List of set values
Explanation
Without signal output
Operation status signal output
Remote status signal output
Ready completion (TEMP READY) signal output
Operation stop alarm signal output
Operation continuation alarm signal output
Alarm status signal output
Selected alarm status signal output
Operation start timer setting status signal output
Operation stop timer setting status signal output
Recovery from power failure setting status signal output
Anti-freezing setting status signal output
Contact input signal 1 pass through signal output
Contact input signal 2 pass through signal output
Warming up function setting status output
Anti-snow coverage function setting status output
Table 2.4-15 List of set values
Explanation
N.O type
N.C type
Initial value
(Default setting)
○
1
Initial value
(Default setting)
○
HRSH Series
Advertisement
Table of Contents
