Miele DA 6796 W Operating And Installation Instructions page 33

a 1 vent collar
for an exhaust duct  6 " (150 mm).
b 1 reducing collar
for an exhaust duct  5 " (125 mm).
c 1 non-return flap
for installation in the outlet duct
collar of the motor unit (not for
recirculation mode). Depending on
the device version, the non-return
flap is already mounted.
d Cover foil
for use when changing extraction
ducting direction
e Wall bracket
for securing the ventilation hood on
the wall.
5 screws ³/₁₆" x 2 ³/₈" (5 x 60 mm)
and
5 plugs ⁵/₁₆" x 2" (8 x 50 mm)
3 washers ¹/₄" (6.4 mm)
for attaching to the wall. Plugs not for
use in USA / CDN.
The screws and plugs are designed
for use in solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
Installation instructions
Installation
33