Activating/Changing The Odorfree Charcoal Filter Operating Hours Counter; Checking The Filter Saturation Indicator - Miele DA 6796 W Operating And Installation Instructions

Operation (Automatic and Manual modes)
Activating/changing the OdorFree
Charcoal Filter operating hours
counter
The OdorFree Charcoal Filter is required
for extraction mode.
The operating hours counter for the
OdorFree Charcoal Filter requires one-
time activation and must be set to
match your cooking habits.
 Press the On/Off button  to turn the
fan off.
 Tap the delayed shut-down button 
and the OdorFree Charcoal Filter
button  at the same time.
The OdorFree Charcoal Filter symbol 
and one of the fan setting indicators will
flash.
The indicators 1 to IS show the current
time setting:
Indicator 1 ............................ 120 hours
Indicator 2 ............................. 180 hours
Indicator 3 ............................ 240 hours
Indicator IS ......................... deactivated
 Tap the relevant button to select the
time required.
 Confirm your choice by tapping the
OdorFree Charcoal Filter button .
All the indicator lights go out.
If the setting is not confirmed within 4
minutes, the old setting is retained.
24
Checking the filter saturation
indicator
Before the set operating time has run
out, you can check what percentage of
the time has elapsed.
 Press the On/Off button  to turn the
fan on.
 Press and hold the grease filter
button  or the OdorFree Charcoal
Filter button .
One or more of the power level
indicators will flash.
The number of flashing indicators
shows the elapsed operating hours as a
percentage.
Indicator 1 .................................... 25%
Indicators 1 and 2 ......................... 50%
Indicators 1 to 3 ........................... 75%
Indicators 1 to IS ........................ 100%
The elapsed operating hours remain
stored in the memory when the hood
is turned off or if power to the
appliance is lost.