Stopping The Engine - Honda HSS928A Owner's Manual

Hide thumbs Also See for HSS928A:

Owner's manual (89 pages)

Owner's manual (32 pages)

Table of Contents

3. In cold weather or when the

engine is cold, move the

choke knob to the CLOSED

position and move the throttle

lever to the FAST position.

4. Start the engine.

Electric-starter Models

Turn the engine switch to the

START position and release

the switch after the engine has

started. The switch

automatically returns to the

ON position.

NOTICE

Do not operate the starter for

more than 5 seconds. If the

engine fails to start, release

the button and allow the

starter to cool for 10 seconds

before operating it again.

Manual Starting Only

a. Turn the engine switch to

the ON position.

b. Pull the starter grip lightly

until you feel resistance,

then pull briskly in the

direction of the arrow as

shown.

c. Return the starter grip

gently to the engine.

NOTICE

Do not allow the starter grip to snap back against the engine. Return it

gently to prevent damage to the starter.

Do not pull the starter grip while the engine is running. The starter

could be damaged.

5. Let the engine warm up for

several minutes.

If the choke knob has been

pulled to the CLOSED

position to start the engine,

gradually push it to the OPEN

position as the engine warms

up. Move the throttle lever to

the SLOW position.

FAST

THROTTLE

LEVER

CHOKE KNOB

(closed)

OFF

START

DC ELECTRIC ENGINE SWITCH

STARTER GRIP

Direction to pull

FAST

SLOW

THROTTLE

LEVER

CHOKE KNOB

(open)

6. While warming the engine up, also warm the transmission

as follows:

a. Check that the

F (FORWARD)

shift lever is in

the "N" (Neutral)

N (NEUTRAL)

position.

R (REVERSE)

b. Squeeze the drive

clutch lever for

about 30 seconds

to warm up the

transmission fluid.