BT 1200 User Manual page 41

Telephone problems
• Call appears to have been
cut off after pressing the
button.
SECRECY
• light on the handset
BATT LOW
is flashing.
• No light on the
CHARGING
base unit.
• Back-up battery fails
frequently.
Possible cause
You may have pressed a number key
on the handset after pressing the
button. The current
SECRECY
handset will try to transfer the call
to another handset.
The handset needs recharging.
Dirty contacts on base unit or
handset.
Frequent power failures will drain
the back-up battery.
Unplugging the base unit from the
power supply drains the back-up
battery.
Switching the mains supply off will
drain the back-up battery.
Solution
Wait 30 seconds; the call will return
to the current handset. Or press the
button and the call will return
TALK
immediately.
Replace the handset on the base
unit, ensuring that the base unit is
plugged in and that the
CHARGING
light is on.
Clean the contacts with a dry cloth.
Heavy soiling can be removed with a
pencil eraser.
Leave the base unit plugged in, or
remove the back-up battery before
unplugging.
Do not switch off, or remove the
back-up battery before switching off.
Help
39