BT 1200 User Manual page 17

Ending an intercom call
Press the
• INTERCOM
the handset or base unit. Both
lights on the handset
INTERCOM
and base unit go out.
To call the handset from the
base unit
At the base unit:
INTERCOM
Press the
• INTERCOM
the base unit. The base unit
light flashes and both
INTERCOM
the handset and base unit ring.
If the handset does not reply to an
intercom call, press the
button again to clear the call. You
cannot make an intercom call if the
handset is busy.
At the handset:
INTERCOM
Press the
• INTERCOM
speak. The
INTERCOM
flashing but stays on.
button on
button on
INTERCOM
button and
light stops
Using your Freestyle 1200 telephone
Ending an intercom call:
Press the
• INTERCOM
the handset or base unit. Both
lights on the handset
INTERCOM
and base unit go out.
You cannot use the intercom while a
call is in progress. The intercom will
beep for 60 seconds and then
automatically cut off if not answered.
To adjust the INTERCOM
loudspeaker volume at the
base unit
VOLUME
Press the left-hand side of the
•
switch to lower the
VOLUME
volume.
Press the right-hand side of the
•
switch to raise the
VOLUME
volume.
If there is an incoming call when using
the intercom, the base unit and
handset will ring. To take the call,
press the button on the handset.
TALK
The intercom call is cut off automatically.
button on
15