Specifications - Stihl MS 362 Instruction Manual

Specifications

Engine
STIHL single cylinder two-stroke engine
MS 362
Displacement: 59.0 cc
Bore: 47 mm
Stroke: 34 mm
Engine power to 3.5 kW (4.8 bhp)
ISO 7293: at 10,000 rpm
1)
Idle speed: 2,800 rpm
1)
to ISO 11681 +/- 50 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor NGK CMR 6 H,
type): BOSCH USR 4A
C
Electrode gap: 0.5 mm
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity:
Chain Lubrication
Fully automatic, speed-controlled oil
pump with rotary piston. Additional
manual oil flow control
MS 362, MS 362 C
Oil tank capacity:
Weight
dry, without bar and chain
MS 362:
Cutting Attachment
Actual cutting length may be less than
the specified length
Rollomatic guide bars
Bar lengths
(3/8" pitch):
Groove width:
3/8" chains
Rapid Micro (36 RM) Type 3652
Rapid Super (36 RS) Type 3621
Rapid Super 3 (36 RS3) Type 3626
Pitch:
Drive link gauge:
Chain Sprockets
7-tooth for 3/8" (rim sprocket)
Max. chain speed accord-
ing to ISO 11681:
Chain speed at maximum
power:
600 cc (0.6 l)
Noise and Vibration Data
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
Sound pressure level L
325 cc (0.325 l)
106 dB(A)
Sound power level L
117 dB(A)
5.6 kg
Vibration measurement a
ISO 22867
Left handle:
Right handle:
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
37, 40, 45, 50 cm
for the vibration level.
1.6 mm
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
3/8" (9.32 mm)
Chemical substances.
1.6 mm
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Exhaust Emissions
28.9 m/s
The CO
21.7 m/s
approval procedure is specified at
www.stihl.com/co2.
The measured CO
determined on a representative engine
in accordance with a standardized test
procedure under laboratory conditions
and does not represent either an explicit
or implied guarantee of the performance
of a specific engine.
English
to ISO 22868
p
to ISO 22868
w
to
hv, eq
2
3.5 m/s
2
3.5 m/s
value measured in the EU type
2
value was
2
2
45