Winix 5300-2 User Manual page 16

FILTER CARE
6. Cleaning the filters
Intervals between filter cleaning may vary depending on the air quality.
② Use a vacuum cleaner or soft
brush to clean the Pre-filter. If it
is excessively soiled, rinse in room
temperature water.
•Do not use detergent or soap.
•Allow the filter to dry for 24 hours or
more before using.
 If the pre-filter becomes damaged or in any way needs replacement:
Please contact Winix
(877)-699-4649
www.winixamerica.com
NOTICE
English
• D o not use benzene, alcohol, or other volatile fluids, which
may cause damage or discoloration.
• T he Pre-filter is resusable after cleaning, ensuring it is
completely dry.
•Do not use hot water over 104
paint thinner.
• A fter washing the filter, allow it to dry completely in a well
ventilated area. Otherwise, it may develop a bad odor.
o
F or volatile fluids such as
16
5300-2