Epson PowerLite Home Cinema 3900 User Manual page 126

Status light Power light
Flashing blue Off
Blue Blue
Flashing blue Off
Flashing blue Off
Flashing blue Off
Flashing blue Off
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Image Quality Settings - Image Menu
Projector Setup Settings - Extended Menu
Lamp light Temp light
Orange Off
Flashing Off
orange
Off Flashing
orange
Flashing Flashing
orange orange
Orange Orange
Flashing Off
orange
126
Status and solution
Lamp has a problem
• Check the Lamp Hours in the Info
menu to see if the lamp is burned out.
Unplug the projector, wait for the lamp
to cool down, and check if it is broken
or installed incorrectly; reseat or
replace the lamp as necessary
• Clean or replace the air filter
• Make sure the lamp cover is closed
• If operating the projector at high
altitude, turn on High Altitude Mode
• If the problem persists, unplug the
projector and contact Epson for help
Replace the lamp soon to avoid damage;
do not continue using the projector
A fan or sensor has a problem; turn the
projector off, unplug it, and contact
Epson for help
Auto Iris error; turn the projector off,
unplug it, and contact Epson for help
Power error; turn the projector off,
unplug it, and contact Epson for help
Internal projector error; turn the projector
off, unplug it, and contact Epson for help