Table of Contents
Advertisement
Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Projector Info information
Information item
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Color Depth
Status
Serial Number
Event ID
Version information
Information item
Main
Video
Event ID Code List
Parent topic:
Adjusting the Menu Settings
Related tasks
Replacing the Lamp
Description
Displays the number of hours (H) the lamp has been used
Displays the name of the port to which the current input source is
connected
Displays the input signal setting of the current input source
Displays the resolution of the current input source
Displays the scan mode of the current input source
Displays the refresh rate of the current input source
Displays the 3D format of the current input source
Displays information that may be needed by a service technician
Displays the color depth and color difference
Displays information about projector problems that may be needed
by a service technician
Displays the projector's serial number
Displays the Event ID number corresponding to a specific projector
problem; see the list of Event ID codes
Description
Displays the firmware version of the projector
103
Advertisement
Table of Contents
