Available Picture In Picture Options - Epson PowerLite Home Cinema 3900 User Manual

Note: You can display only HDMI video sources when using Picture in Picture mode.
Note: You cannot use Picture in Picture while projecting 3D images or when Image Processing is set to
Fast in the Signal menu.
1. Turn on the projector and switch to the HDMI image source you want to use.
2. Press the P-in-P button on the remote control.
The second HDMI video source appears as a sub-screen in the corner of the image.
Note: While Picture in Picture mode is active, press the Menu button on the remote control to adjust
the size and position of the sub-screen.
3. To swap the main screen and sub-screen video sources, press and hold the P-in-P button for at
least three seconds.
4. Press the P-in-P button again to close the sub-screen and resume normal projection.

Available Picture in Picture Options

Parent topic:
Available Picture in Picture Options
You can adjust the following options by pressing the Menu button on the remote control while Picture in
Picture mode is active:
Setting
Subscreen Size
Subscreen Position
Swap Main/Sub
Adjusting Projector Features
Description
Adjusts the size of the sub-screen
Adjusts the location where the sub-screen is displayed
Switches the video source displayed on the main screen with the
source displayed on the sub-screen
76