Table of Contents
Advertisement
Event ID code
0894
0898
0020
0026
0032
0036
0037
0038
0899
Parent topic:
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All option on the
Reset menu.
You can reset the projector's lamp usage timer to zero when you replace the lamp using the Reset
Lamp Hours option and you can also reset all memory entries using the Reset Memory option.
Cause and solution
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the DHCP setting in the Network menus.
Communication error. Turn the projector off and then on again.
Projector Information Display - Info Menu
105
Advertisement
Table of Contents
