Yamaha GRIZZLY 125 YFM125GT Owner's Manual page 66

NOTE:
If the starter switch is pushed with the main
switch "ON" and the engine stop switch "OFF",
the starter motor will be activated but the engine
will not start. To start the engine, be sure to
position the engine stop switch at "RUN".
EBU14770
Light switch "LIGHTS"
Set the switch to the "LO" position to turn on the
low beam and the taillight.
Set the switch to the "HI" position to turn on the
high beam and the taillight.
Set the switch to the "OFF" position to turn off all
of the lights.
4-7