Adjusting A Headlight Beam; Replacing The Tail/Brake Light Bulb; Removing A Wheel - Yamaha GRIZZLY 350 YFM350DE Owner's Manual

7. Install the bulb holder cover and the cover at
the rear of the headlight. NOTICE: Make sure
the headlight bulb holder cover is securely
fitted over the bulb holder and seated
properly.
[ECB00671]
8. Adjust the headlight beam if necessary.
EBU25551

Adjusting a headlight beam

ECB00690
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
8
To lower a headlight beam, turn the adjusting
screw in direction (b).
1. Headlight beam adjusting screw
EBU25580

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, have a
Yamaha dealer replace it.
EBU25651

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
8-45