1. Locknut
2. Adjusting bolt
4. Turn the adjusting bolt in or out until the brake
pedal height is within the specified limits.
5. Tighten the locknut.
Tightening torque:
Locknut:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
6. Install the footboard by installing the bolts and
nuts, and then tighten the bolts to the speci-
fied torques.
2
1
1
1. Footboard bolt A
2. Footboard bolt B
Tightening torques:
Adjusting the brake pedal free play
The brake pedal free play should measure 20.0–
30.0 mm (0.79–1.18 in) as shown. If the free play
is incorrect, adjust it as follows.
8-32
2
Footboard bolt A:
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
Footboard bolt B:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1
8