Yamaha GRIZZLY 350 YFM350DE Owner's Manual page 106

1. Tailpipe bolt
2. Tailpipe
2. Remove the tailpipe by pulling it out of the
muffler.
8
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from the
spark arrester portion of the tailpipe and inside
of the tailpipe housing.
1. Tailpipe
2. Spark arrester
4. Insert the tailpipe into the muffler and align the
bolt holes.
5. Install the tailpipe bolts and tighten them to the
specified torque.
Tightening torque:
Tailpipe bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
8-23